Toyota Hilux Hiace 1Y 2Y 3Y 4Y T18 32/36 DGV Weber kit
(Exc. GST for international customers)
Toyota Hilux Hiace 1Y 2Y 3Y 4Y T18 32/36 DGV Weber kit
TO PURCHASE THIS KIT SELECT PART NUMBER DGV219Lynx 32/36 DGV Weber Conversion kit to suit Toyota Corolla, Corona, Celica, Crown, Hilux 1Y, 2Y, 3Y, 4Y, Hiace 2YC, 3YC, 4YC 2L to 1986 & T18 (use original heatshield) This conversion kit suits existing manifold stud pattern of 112 x 50mm Kit includes; 1 x Weber 32/36 DGV-5A manual choke carburettor (genuine Weber) 1 x KC219 adaptor kit 1 x RF658S Ramflo performance air filter 1 x KC917 universal cable linkage kit The KC219 adaptor kit is a quality Australian casting and machined for a perfect fit every time. This ensures correct sealing and optimal flow. It comes complete with all fitting hardware. The Ram-Flo air filter supplied is a proven design offering excellent flow and filtration properties, along with an attractive appearance. Where practical, we recommend using as much of the original throttle linkage assembly as possible. Some minor modifications may be required for installation. Instructions for installing adaptor plate and linkage assembly are included. As the conversion kits we sell find their way onto different vehicles, fitted with different engines, with different modifications, in different climates and used under different conditions, it is virtually impossible to supply a carburettor with precise jetting for the application. We supply the 32/36 DGV carburettor with factory Weber jetting of; Primary: 140 main jet, 165 air corrector, 55 idle jet, F50 emulsion tube Secondary: 135 main jet, 160 air corrector, 50 idle jet, F6 emulsion tube These specs are a good starting point for most applications. Any new carburettor (claimed to be rejetted or not) fitted should be tuned to the specific engine it is installed on.