Simply bolt the ready assembled linkage to the top of the carburettor. The casting is profiled to the shape of the carburettor lid and carries the linkage assembly alongside the carburettor, preserving the classic style. The ultra-low profile makes it suitable for all applications - Height over highest part of carburettor - Weber 10mm
All aftermarket throttle linkages have to fit a wide range of different applications and makes, all with different throttle cable travel and spring tension requirements. Unless the linkage system has a very wide range of adjustment for the throttle cable travel, for some applications it can be difficult to fully open or close the throttle. The Mangoletsi linkage has 22 - 48mm of adjustment. Adjusting the linkage for the correct cable travel will then alter the tension of the pull-off springs. Therefore it will be necessary to adjust the spring tension to positively return the engine to idle or give a good "feel" to the throttle pedal. Many aftermarket linkages have little or no adjustment.
Pre-assembled and ready to fit
For more information please click HERE